Lavender dyeing is really disappointing when your lavender plants are not as vibrant as they used to be. I suffered from it for 1 month and tried everything to bring them back. I even googled it and there wasn’t much information out there.
Then I tell my friend about my lavender dyeing. Her advice was to cut off all the dead leaves and flowers. She also told me to give them more water and sunlight. I followed her instructions and my lavender plants are slowly coming back!
I know how important it is for you to have beautiful lavender plants, so I want to share with you what I did to bring my plants back to life.
Bringing lavender back wasn’t easy I much rather have spent my time doing other things, but it was important to me. I hope this article provides some guidance on what to do when your lavender plants are looking a little lackluster.
When will you know your lavender is dying?
The main symptom of lavender dying is yellowing or browning of the leaves. This is usually accompanied by a general overall decline in the health of the plant. If your lavender is dying, you may also notice that the stems are weak and spindly and that flowers and buds are few and far between.
If lavender starts dying, it will die completely if not treated within 5-10 days. So, if you see any of these symptoms, it’s important to take action immediately.
What causes lavender to die?
I have revealed in my other article the reason for lavender dying. The main culprits are fungal diseases, such as powdery mildew or botrytis. These diseases are often the result of too much moisture in the air or on the plant. Another common cause of lavender death is root rot, which is caused by wet, poorly drained soil.
1. Overwatering
Watering your lavender plants too much is one of the main reasons they may die. When you overwater plants, you are providing them with too much water than they can use, which can cause the roots to rot. This will eventually kill the plant.
To prevent overwatering, be sure to water your plants only when the soil is dry to the touch. You may also want to wait until the morning or evening to water so that the plants have a chance to dry off before nightfall.
2. Poor Drainage
If the soil in which your lavender plants are growing does not drain well, this can also lead to problems. When the roots of plants are constantly wet, they will eventually rot and the plant will die.
To improve drainage, you can add sand or grit to the soil. Alternatively, you can plant your lavender in a raised bed or pot, which will improve drainage and prevent the roots from sitting in water.
3. Fungal Diseases
Fungal diseases, such as powdery mildew and botrytis, can also cause lavender plants to die. These diseases are often the result of too much moisture in the air or on the plant.
To prevent fungal diseases, be sure to water your plants only when the soil is dry to the touch. You may also want to wait until the morning or evening to water so that the plants have a chance to dry off before nightfall. In addition, it’s important to keep the leaves of your plants dry, as wet leaves are more susceptible to fungal diseases.
4. Pests
Pests, such as aphids, scale, and mealybugs, can also cause lavender plants to die. These pests feed on the leaves of the plant, causing them to turn yellow and eventually die. In addition, pests can also spread diseases, which can further damage the plant.
To prevent pests, be sure to inspect your plants regularly and remove any pests you see. You may also want to treat your plants with insecticidal soap or neem oil.
5. Cold Weather
Lavender plants are native to Mediterranean countries and do not tolerate cold weather well. If the temperature drops below freezing, the leaves of the plant will turn black and die.
To protect your plants from cold weather, you can mulch around the base of the plant or cover it with a frost cloth. You may also want to bring potted plants indoors during colder months.
How to revive dying lavender plants
Lavender is a beautiful, fragrant plant that’s easy to grow. But sometimes, even with the best care, lavender plants can start to look sickly and die.
I was devastated to see my lavender dying. I know you are upset because your lavender is almost dying. don’t worry I am here to help you out. So let’s revive dying lavender plants together.
1. Remove any dead or dying leaves, stems, or flowers
Dead leaves, stems, or flowers can cause plant death. So, it’s important to remove them as soon as possible.
Remove dead leaves
Removing dead leaves is an important part of keeping your lavender healthy. When leaves die, they can cause the rest of the plant to die as well. To remove dead leaves, use a sharp knife or scissors to cut them off at the stem. Be careful not to damage any of the healthy leaves while you’re doing this.
Remove dead stems
Dead stems are unsightly and can prevent a lavender plant from thriving. To remove them, first, use a pair of sharp scissors to cut them off at the base. If the stems are stubborn and won’t come off easily, you can use a knife to slice them off. Be careful not to damage the plant’s stem in the process.
Remove dead flowers
When a lavender plant starts to die, the first thing you should do is remove the dead flowers. This will help the plant to focus its energy on producing new flowers. You can either snap off the dead flowers by hand or use scissors to cut them off.
2. Thin out the plant to improve air circulation
Lavender does not like extra plants around it. If you want to help your lavender, thin out the plant. This will improve air circulation and prevent pests and diseases from attacking your plant. here are the steps on how to thin out your lavender plant:
- Cut off any dead or dying stems at the base of the plant.
- Prune away any weak or leggy growth.
- Trim back any overgrown branches.
- Cut away any crowded plants to improve air circulation.
- Discard all the trimmings in the trash.
3. Prune the plant back to encourage new growth
As the plant begins to grow new shoots, you can begin to prune it back to encourage more branching. Snip off the dead flower heads and any woody stems that are no longer growing.
Leave about 6 inches of stem on each shoot so that the plant has something to grow from. If the plant is still looking leggy, you can cut it back even further, to about 3 inches.
4. Inspect the roots and remove any that are damaged or diseased.
If you are finding that your lavender plants are not doing well, it is important to inspect the roots and remove any that are damaged or diseased. By doing so, you can help to revive the plant and get it back on track.
5. Make sure the plant is getting enough light.
Lavender plants need plenty of sunlight in order to thrive. If your plant is not getting enough light, it may start to wilt and die. Be sure to place it in a sunny spot in your home or garden so that it can get the light it needs.
6. Improve drainage by adding sand or grit to the soil
Adding sand or grit to the soil can improve drainage and help to revive a dying lavender plant. By increasing the amount of air in the soil, it becomes easier for the roots to get the water and nutrients they need. This simple fix can make all the difference for a struggling plant.
7. Plant your lavender in a raised bed or pot to improve drainage
When your lavender plants are looking a little wilted, it might be due to drainage issues. Planting them in a raised bed or pot can improve drainage and help your plants revive. Make sure the soil in your raised bed or pot is well-drained and sandy so that the water doesn’t stagnate.
8. Water only when the soil is dry to the touch
Watering lavender plants only when the soil is dry to the touch is a good way to help keep them healthy and thriving. By waiting until the soil is dry before watering, you are ensuring that the plant is getting the right amount of water and not being over- or under-watered. This can be especially helpful during hot, dry summers when plants are thirstier than usual.
9. Keep the leaves of your plants dry to prevent fungal diseases
Fungal diseases can be a major problem for lavender plants, as they can cause the leaves to die. To prevent these diseases, it is important to keep the leaves of your plants dry. This can be done by watering the plants in the morning so that the leaves have time to dry before nightfall. You may also want to avoid using mulch around your plants, as this can increase the humidity around the leaves and lead to fungal diseases.
10. Treat your plants with an insecticidal soap or neem oil
In order to revive dying lavender plants, you can treat them with insecticidal soap or neem oil. Insecticidal soaps work by penetrating the insect’s outer shell and disrupting its cellular function, while neem oil works by blocking the reproduction of insects. Either of these treatments should be effective in bringing your lavender plants back to health.
11. Mulch around the base of the plant or cover it with a frost cloth
Mulch is a material that is spread around plants to protect them from the elements and to improve the quality of the soil. When applied to lavender plants, mulch can help to revive them by keeping the soil moist and protecting them from wind and sun damage.
Mulch can also help to prevent fungal diseases from taking hold in the plant’s leaves. There are many different types of mulch that can be used, including straw, bark, compost, and plastic. Be sure to choose a mulch that will not harm the plants and is compatible with the soil type.
Frost cloth is a type of fabric that is used to protect plants from frost damage. This can be especially helpful for lavender plants that are struggling in cold weather.
Frost cloths work by trapping heat from the sun and creating a microclimate around the plant, which can help to keep it warm enough to survive a cold snap. Be sure to remove the frost cloth during the day so that the plant can get some sunlight.
12. Inspect your plants regularly
Regular inspection of your lavender plants is necessary in order to determine whether they are healthy and thriving or not. If you notice any signs of distress, such as wilting or yellowing leaves, take action right away to revive them. One easy way to do this is by giving them good watering, making sure to water the soil and not just the leaves. You can also add a little bit of organic fertilizer to the soil to give your plants a boost.
Revive lavender in shade
Lavender plants do not like shade, so if your lavender is not getting enough sun, it may start to look unhealthy. To revive a lavender plant that is in shade, simply move it to an area that gets more sun.
Follow these tips to revive lavender in the shade:
- Make sure the plant is getting at least six hours of sun per day.
- Water the plant regularly, making sure to not over or underwater it.
- Prune the plant regularly to encourage new growth.
- Feed the plant a balanced fertilizer every few weeks.
- Monitor the plant for pests and diseases and treat them accordingly.
Revive Lavenders in a Pot or Container
Lavender plants can be revived if they are in a pot or container. If the lavender plant is wilted, you can revive it by cutting off the wilted part of the plant and then putting it in water. The lavender plant will absorb the water and will become healthy again. You can then replant the lavender plant in the soil.
If the lavender plant is completely dried out, you can revive it by soaking it in water for a few hours. Once the plant has absorbed the water, you can replant it in the soil.
Conclusion
If your lavender plants are looking unhealthy, there are several things you can do to revive them. First, make sure they are getting enough sun and water.
You can also add a little bit of organic fertilizer to the soil. If the plants are in a pot or container, you can revive them by soaking them in water or cutting off the wilted parts of the plant. Regular inspection of your plants is also necessary to ensure their health. By following these tips, you can revive your lavender plants and keep them looking healthy for years to come.
I hope you enjoyed this article on how to revive dying lavender plants. If you have any questions or comments, please leave them below. Thanks for reading!
